Legend
[Official] — published by SMiTSense or Guowei Group. [Needs datasheet] — not published by the manufacturer; confirm against the SS-LD-01D Pro datasheet before quoting. [Calculated] — derived from published figures, not a manufacturer spec.
1. Quick Start Guide & Tech Docs
2. Introduction
The SS-LD-01D Pro is a single-line scanning dToF LiDAR from SMiTSense (Shenzhen Guowei Sensing Technology, 国微感知), a Guowei Group company. A rotating scanner covers 360° horizontally in a single plane, aimed at AGV / AMR navigation, service robots, smart logistics, volume measurement and safety inspection. [Official]
Published figures for this model: 905 nm Class 1 laser, 0.1–40 m at 10% reflectivity and up to 100 m at 90% reflectivity, 40 kHz peak sampling, 10–20 Hz scan rate, ±2 cm typical accuracy, UART TTL on the standard kit. [Needs datasheet]
3. Features
- 360° single-plane scanning — rotating dToF scanner covering a full horizontal circle in one plane; a 30° vertical field is additionally claimed. [Official] / [Needs datasheet]
- dToF pulsed ranging — direct time-of-flight measurement with ambient light suppression, suited to both indoor and outdoor use. [Official]
- Range quoted with reflectivity — 40 m at 10% diffuse reflectivity, up to 100 m at 90%. Always quote the two together; a bare “100 m” is not a usable specification. [Needs datasheet]
- 40 kHz peak sampling — angular resolution and scan rate are physically linked. At 40 kHz: 10 Hz gives roughly 0.09°, 20 Hz gives roughly 0.18°. Both cannot be held at the maximum simultaneously. [Calculated]
- 905 nm Class 1 laser — Class 1 laser product per IEC 60825-1. The word “certified” applies only if a third-party certificate is supplied with the unit. [Needs datasheet]
- UART TTL standard interface — RS485, CAN and Ethernet are listed as supported options; confirm whether they are on-board or require a different SKU. [Needs datasheet]
- Ranging accuracy — ±2 cm typical, ±3 cm maximum. [Needs datasheet]
- 100,000 lux ambient light immunity — claimed tolerance to direct outdoor sunlight. [Needs datasheet]
4. Applications
- AGV / AMR navigation — 360° obstacle detection, path planning and safety deceleration. [Official]
- Service robots — localisation, map building and autonomous movement. [Official]
- Smart logistics and warehousing — pallet tracking and volume measurement. [Official]
- Safety inspection and perimeter monitoring — virtual fencing and intrusion detection. [Official]
5. Specification
5.1 Ranging and scanning
- Ranging principle: direct time-of-flight (dToF), rotating single-line scanner [Official]
- Wavelength / laser class: 905 nm, Class 1 per IEC 60825-1 [Needs datasheet]
- Range: 0.1–40 m at 10% reflectivity; up to 100 m at 90% reflectivity [Needs datasheet]
- Accuracy: ±2 cm typical, ±3 cm maximum [Needs datasheet]
- Sampling rate: 40 kHz peak [Needs datasheet]
- Scan rate: 10–20 Hz [Needs datasheet]
- Angular resolution: approximately 0.09° at 10 Hz and 0.18° at 20 Hz, derived from 40 kHz divided by points per revolution [Calculated]
- Field of view: 360° horizontal [Official]; 30° vertical claimed [Needs datasheet]
5.2 Electrical and mechanical
- Supply voltage: DC 4.8–5.2 V on the UART standard kit; a 9–36 V wide-voltage version is a separate industrial SKU [Needs datasheet]
- Power consumption: 1.8 W typical, 8 W peak [Needs datasheet]
- Interface: UART TTL standard; RS485 / CAN / Ethernet optional [Needs datasheet]
- Ingress protection: IP5X or IP67 depending on variant. These two ratings are not interchangeable — IP5X allows limited dust ingress, IP67 is dust-tight and water-resistant [Needs datasheet]
- Dimensions / weight: two figures circulate — 53 × 53 × 57 mm (~115 g) and Φ80 × 70 mm (~450 g with industrial base). Confirm which applies to the kit sold here [Needs datasheet]
- Operating temperature: -30 °C to +60 °C; storage -40 °C to +85 °C [Needs datasheet]
5.3 Integration
- Operating system: Linux [Needs datasheet]
- Software: ROS / ROS 2 driver and point-cloud viewer are claimed; no public repository published by the manufacturer [Needs datasheet]
- Certification: not published [Needs datasheet]
6. Model Designation Note
“SS-LD-01D Pro” is a genuine SMiTSense model. The SS-LD-01D was first shown at the 2023 World Robot Conference and the Pro revision is the current one in the line-up. Reseller prefixes such as YYT- denote distribution SKUs, not manufacturer part numbers. [Official]