Skip to product information

youyeetoo Pico-G1 AI IP Camera Development Board (GOKE GK7206 Dual-Core Cortex-A7, 1.0 TOPS NPU, 4K AI ISP, 100M Ethernet, MIPI CSI, Type-C, Linux)

Vendor: youyeetoo
Availability: In stock
Product type: Development Board
$29.00
Shipping calculated at checkout.
RAM Configuration: Pico-G1 128M (GK7206V11A / 128MB DDR / 16MB Flash)
Product subtotal: $29.00

You may also like

Legend

[Official] — from the youyeetoo-Pico-G1 wiki (wiki.youyeetoo.com), maintained by the board vendor. [Needs datasheet] — not stated in the official documentation; confirm before quoting.

1. Quick Start Guide & Tech Docs

2. Introduction

The youyeetoo-Pico-G1 is an IP camera development board for professional security, consumer, carrier and automotive vision applications. It is built on the GOKE GK7206 series — a dual-core ARM Cortex-A7 MP2 at up to 1.0 GHz with an integrated RISC-V coprocessor, a 1.0 TOPS general-purpose NPU, an AI ISP pipeline and H.265 / H.264 encoders. The board measures 72 × 21 mm and exposes MIPI CSI, 10/100 Mbps Ethernet, a Micro SD slot and a single USB 2.0 Type-C port that carries power, flashing and debug. [Official]

3. Features

  • Dual-core Cortex-A7 plus RISC-V — the A7 pair runs system control and service scheduling while the RISC-V coprocessor handles lightweight real-time tasks. [Official]
  • 1.0 TOPS NPU — loads .xmm models, runs SVP video-stream inference for face detection, motion analysis and object recognition on device. [Official]
  • AI ISP with 4K input — up to 3840 × 2160 @ 20 fps input, with 2-frame WDR, AI noise reduction, 3DNR, defect pixel correction, lens distortion correction, demosaic and 3A. Full-colour low-light imaging without dedicated fill light. [Official]
  • Single-cable bring-up — the USB 2.0 Type-C port supplies power, image flashing and serial debug, so no separate programmer or bench supply is needed. [Official]
  • Three upgrade paths — firmware can be written over local USB, over UART, or over UART combined with Ethernet. [Official]
  • Expansion in a 72 × 21 mm footprint — 2 × TTL UART (one shared with debug), 2 × I2C multiplexed via IO, SPI, GPIO, RTC battery connector, RESET button, U-Boot flashing button and one user-programmable LED. [Official]
  • Linux SDK with media and NPU samples — MPP framework, video encode samples, UVC webcam sample, ISP tuning and expansion-board examples. [Official]

4. Applications

  • Security and low-light IP cameras — full-colour night surveillance, perimeter intrusion detection, motion tracking. [Official]
  • Edge vision and robotics — embedded vision sensing for mobile robots, robotic arms, face recognition and gesture recognition. [Official]
  • Industrial inspection and IoT nodes — optical quality inspection, defect detection, meter reading. [Official]
  • Automotive and fleet cameras — low-power driver monitoring and commercial vehicle recording. [Official]

5. Specification

5.1 Two versions

  • Model: youyeetoo-Pico-G1 128M — GOKE GK7206V11A, 128 MB DDR, 16 MB NOR Flash [Official]
  • Model: youyeetoo-Pico-G1 256M — GOKE GK7206V12A, 256 MB DDR, 16 MB NOR Flash [Official]
  • Board size: 72 × 21 mm, both versions [Official]

5.2 Compute and media

  • CPU: ARM Cortex-A7 MP2, dual core, up to 1.0 GHz [Official]
  • Coprocessor: integrated RISC-V [Official]
  • NPU: 1 TOPS [Official]
  • ISP: AI ISP — 2F-WDR, AI NR, 3DNR, LDC, defect pixel correction, demosaic, 3A [Official]
  • Camera input: MIPI CSI, up to 3840 × 2160 @ 20 fps [Official]
  • Video encoding: hardware H.265 / H.264 [Official]
  • Operating system: Linux [Official]

5.3 I/O and expansion

  • Network: 1 × 10/100 Mbps adaptive Ethernet (RJ45) [Official]
  • USB: 1 × USB 2.0 Type-C — power, firmware download and debug [Official]
  • UART: 2 × TTL, multiplexed, one shared with the debug port [Official]
  • I2C: 2 ×, multiplexed via IO [Official]
  • SPI and GPIO: available on the expansion header [Official]
  • Storage: Micro SD / TF card expansion [Official]
  • RTC: supported, with dedicated battery connector [Official]
  • System upgrade: local USB, UART, or UART with Ethernet [Official]
  • Buttons and indicators: 1 × RESET, 1 × U-Boot flashing, 1 × user-programmable LED [Official]

5.4 Power and environment

  • Power input: via the USB 2.0 Type-C port; voltage and current limits are not published [Needs datasheet]
  • Operating temperature: not published [Needs datasheet]

6. Choosing Between the Two Versions

Both versions share the same SoC family, the same 16 MB NOR Flash and the same 72 × 21 mm footprint; the only difference is DDR size — 128 MB on the GK7206V11A and 256 MB on the GK7206V12A. The SoC supports 4K input on paper, but 128 MB of DDR leaves very little headroom for a 4K pipeline once the OS, MPP buffers and NPU runtime are loaded. For anything above 1080p with AI inference running concurrently, start with the 256 MB version. [Official]