Skip to product information

RevoView RW-WUKONG100 10.1-inch 5G AI Industrial Touch Tablet & Development Kit (Unisoc UIS7885 8-Core 2.7GHz, 10.1" FHD 1920x1200, Dual SIM 5G, PCIe, Type-C DP1.4)

Vendor: RevoView
SKU: RWDPNG100001
Availability: In stock
Product type: 5G AI Edge Computer / Industrial Touch Tablet
$499.00
Shipping calculated at checkout.
Configuration: Standard 10.1" 5G AI Touch Tablet Kit
Product subtotal: $499.00

You may also like

Legend

[Official] — from the OpenHarmony board support repository device_board_revoview/wukong100 maintained by the manufacturer. [Needs datasheet] — not stated in the official repository; confirm with RevoView before quoting.

1. Quick Start Guide & Tech Docs

2. Introduction

The WUKONG100 is an OpenHarmony development kit built on the Unisoc UIS7885 platform, submitted and maintained by RevoView in the OpenHarmony board support repository. It combines an 8-core Cortex-A76/A55 CPU, Mali-G57 GPU and 8 TOPS NPU with 8 GB LPDDR4X and 256 GB UFS, a 10.1-inch 1920 × 1200 60 Hz capacitive panel, 5G multi-band cellular, dual Nano-SIM, and a 36-pin PCIe expansion connector — positioned as an embedded platform for smart terminals, edge computing and IoT device development. [Official]

3. Features

  • UIS7885 with 8 TOPS NPU — 4 × Cortex-A76 + 4 × Cortex-A55, Mali-G57 GPU, 6 nm EUV. [Official]
  • 8 GB LPDDR4X + 256 GB UFS — fixed configuration; storage expandable via the SD slot, which supports SDXC UHS-II. [Official]
  • 10.1-inch 1920 × 1200 @ 60 Hz — IPS-class panel with multi-point capacitive touch. [Official]
  • 5G SA/NSA multi-band — N1/3/5/8/28/41/77/78, plus 4G/3G/2G fallback, 2 × Nano-SIM with hot swap. [Official]
  • Wired networking on board — 1 × RJ45 Gigabit Ethernet, not an add-on module. [Official]
  • Camera and display expansion — 1 × 4-lane MIPI-DSI, 3 × 4-lane MIPI-CSI, and Type-C video output convertible to DP or HDMI. [Official]
  • PCIe and header expansion — 36-pin standard PCIe, 2 × UART, 20 × GPIO, 2 × I2C, 2 × SPI, 2 × ADC, 2 × PWM, 1 × I2S. [Official]
  • Wireless suite — Wi-Fi 5 dual-band 802.11b/g/n/ac, Bluetooth 5.0, NearLink SLE 1.0, GNSS with GPS / GLONASS / Galileo / BeiDou. [Official]
  • OpenHarmony first — the official BSP targets OpenHarmony; Android or Linux ports are not part of the published board support package. [Official]

4. Applications

  • Industrial IoT terminals and edge computing — OpenHarmony device development with on-device AI.
  • Smart terminals and interactive consoles — HMI, kiosks, control panels.
  • Robotics and AMR consoles — multi-camera input plus 5G backhaul.
  • In-vehicle and logistics hubs — telematics, fleet terminals.

5. Specification

5.1 SoC and memory

  • SoC: Unisoc UIS7885, 6 nm EUV [Official]
  • CPU: 4 × Cortex-A76 + 4 × Cortex-A55 [Official]
  • GPU: Arm Mali-G57 [Official]
  • NPU: 8.0 TOPS [Official]
  • RAM: 8 GB LPDDR4X [Official]
  • Storage: 256 GB UFS; 1 × SD slot supporting SDXC UHS-II [Official]

5.2 Display, camera and media

  • Panel: 10.1-inch, 1920 × 1200, 60 Hz [Official]
  • Touch: multi-point capacitive [Official]
  • Display interface: 1 × 4-lane MIPI-DSI; Type-C video output convertible to DP or HDMI [Official]
  • Camera interface: 3 × 4-lane MIPI-CSI [Official]
  • Camera modules: front 5 MP, rear 8 MP autofocus with flash, rear auxiliary 2 MP — configuration not listed in the official board documentation [Needs datasheet]
  • Audio: 3.5 mm headphone jack, left/right speaker connector (2-pin, 2 W @ 8 Ω), 2 × silicon microphone [Official]
  • Haptics: 1 × linear motor [Official]

5.3 Wireless and positioning

  • 5G NR: N1/3/5/8/28/41/77/78 [Official]
  • 4G LTE: B1/2/3/5/7/8/20/34/38/39/40/41 [Official]
  • 3G: B1/2/5/8 2G: B2/3/5/8 [Official]
  • SIM: 2 × Nano-SIM, hot swap [Official]
  • Wi-Fi: Wi-Fi 5, 2.4 / 5 GHz, 802.11b/g/n/ac, 1 antenna [Official]
  • Bluetooth: 5.0 [Official]
  • NearLink: SLE 1.0 [Official]
  • GNSS: GPS / GLONASS / Galileo / BeiDou [Official]
  • NFC: claimed by some listings; not present in the official board documentation [Needs datasheet]

5.4 Expansion and I/O

  • USB: 1 × Type-C USB 3.0, 2 × USB 3.0 Type-A host [Official]
  • Ethernet: 1 × RJ45 Gigabit [Official]
  • PCIe: 36-pin standard PCIe connector [Official]
  • Headers: 2 × UART, 20 × GPIO, 2 × I2C, 2 × SPI, 2 × ADC, 2 × PWM, 1 × I2S [Official]
  • Debug: 1 × UART-over-USB debug port, 1 × JTAG [Official]
  • Sensors: accelerometer, gyroscope, ambient light, proximity, magnetic compass [Official]
  • Buttons: power, reset, volume+ / recovery, volume- [Official]

5.5 Power and mechanical

  • Power input: DC 12 V / 3 A [Official]
  • Battery: a 4.2 V lithium battery option with hardware jumper selection is claimed; capacity and runtime are not published [Needs datasheet]
  • Dimensions: 265 × 196.8 × 36 mm [Needs datasheet]
  • Operating temperature and ingress protection: not published for this kit [Needs datasheet]

6. What this kit is, and what it is not

WUKONG100 is published as a development kit — a board-level OpenHarmony platform with a display, not a certified finished industrial tablet. No IP rating, drop rating or operating-temperature range appears in the manufacturer's documentation, and no certification is listed. If you need a ruggedised, certified enclosure, this module is the wrong starting point. [Official]