Your position: Home / Development Board / FriendlyARM

youyeetoo NanoPi R5S Rockchip RK3568 SBC Quad-core ARM Cortex-A55 CPU 2GB+8GB support NVME, PCIe WiFi ,0.8T NPU

youyeetoo NanoPi R5S Rockchip RK3568 SBC Quad-core ARM Cortex-A55 CPU 2GB+8GB support NVME, PCIe WiFi ,0.8T NPU
Price:
$102.00
  • Bundle:
    Bundle 1
    Bundle 2
    Bundle 3
    Bundle 4
    Bundle 5
    Bundle 6
    Bundle 7
    Bundle 8
Quantity:
-
+
(800 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
Please select the information you wantX
  • Description
  • Size Chart
  • Measurement
  • Color Chart
  • Reviews
Specifications
Brand Name: youyeetoo Demo Board Type: ARM

For downloading the Tools, Driver and Firmware use the following link:

https://youyeetoo.com/blog/nanopi-r5s-ysdpnanor5sa-135

Note:Please note the type what you want:

Bundle 1:NanoPi R5S 2G

Bundle 2:NanoPi R5S Kit (with Metal Case) 2G

Bundle 3:NanoPi R5S 2G+32G TF Card

Bundle 4:NanoPi R5S Kit (with Metal Case) 2G+32GB TF Card

Bundle 5:NanoPi R5S 2G +Power (12V)+Type-C cable

Bundle 6:NanoPi R5S Kit (with Metal Case) 2G+Power (12V)+Type-C cable

Bundle 7:NanoPi R5S Kit (with Metal Case) 4G

Bundle 8:NanoPi R5S Kit (with Metal Case) 4G +32GB TF Card +Power(12V)+Type-C cable

Introduction

  • The NanoPi R5S is a RK3568 SoC based ARM board.

Hardware Spec

  • SoC: Rockchip RK3568B2
    • CPU: Quad-core ARM Cortex-A55 CPU, up to 2.0GHz

    • GPU: Mali-G52 1-Core-2EE,supports OpenGL ES 1.1, 2.0, and 3.2, Vulkan 1.0 and 1.1, OpenCL 2.0 Full Profile

    • VPU: 4KP60 H.265/H.264/VP9 video decoder, 1080P60 H.264/H.265 video encoder

    • NPU: Support 0.8T

  • RAM: 2GB LPDDR4X

  • Flash: 8GB eMMC

  • Ethernet: one Native Gigabit Ethernet, and two PCIe 2.5Gbps Ethernet

  • USB: two USB 3.0 Type-A ports

  • HDMI:
    • support HDMI1.4 and HDMI2.0 operation

    • support up to 10 bits Deep Color modes

    • support up to 1080p@120Hz and 4096x2304@60Hz

    • support 3-D video formats

  • PCIe: M.2 Key M, PCIe2.1 x1, support NVME, PCIe WiFi etc

  • microSD: support UHS-I

  • GPIO:
    • 12-pin 0.5mm FPC connector

    • up to 1x SPI, up to 3x UARTs, up to 4x PWMs, up to 8x GPIOs

  • SD/MMC/SDIO/I2S:
    • 2x8-pin 1.27mm connector

    • Compatible with SDIO3.0 protocol

    • Compatible with SD3.0, MMC ver4.51

    • 4bits data bus widths

    • 1x I2S with 2x SDO and 3x SDI

  • Debug: one Debug UART, 3 Pin 2.54mm header, 3.3V level, 1500000bps

  • LEDs: 4 x GPIO Controlled LED (SYS, WAN, LAN1, LAN2)

  • others:
    • 2 Pin 1.27/1.25mm RTC battery input connector for low power RTC IC HYM8563TS

    • MASK button for eMMC update

    • one 5V Fan connector

  • Power supply: USB-C, support PD, 5V/9V/12V input

  • PCB: 8 Layer, 62x90x1.6mm

  • Ambient Operating Temperature: 0℃ to 70℃

Diagram, Layout and Dimension

 Layout

  • 12-pin GPIO

Pin#

GPIO

SPI

UART

PWM

POWER

Description

1

 

 

 

 

VCC3V3_SYS

3.3V power output

2

 

 

 

 

VCC3V3_SYS

3.3V power output

3

GPIO3_C3

SPI1_CLK_M1

UART5_RX_M1

 

 

3.3V level

4

 

 

 

 

GND

 

5

GPIO3_C2

SPI1_MISOI_M1

UART5_TX_M1

 

 

3.3V level

6

GPIO3_A1

SPI1_CS0_M1

 

 

 

3.3V level

7

GPIO3_C1

SPI1_MOSI_M1

 

 

 

3.3V level

8

 

 

 

 

GND

 

9

GPIO4_C5

 

UART9_TX_M1

PWM12_M1

 

3.3V level

10

GPIO4_C6

 

UART9_RX_M1

PWM13_M1

 

3.3V level

11

GPIO3_C4

 

UART7_TX_M1

PWM14_M0

 

3.3V level

12

GPIO3_C5

 

UART7_RX_M1

PWM15_IR_M0

 

3.3V level

  • 2x8-pin SDIO/I2S

Pin#

GPIO

SD/MMC/SDIO

I2S

POWER

Description

1

 

 

 

VCC5V0_SYS

5V power output

2

 

 

 

VCC5V0_SYS

5V power output

3

GPIO3_C6

SDMMC2_D0_M0

I2S1_MCLK_M1

 

1.8V level

4

GPIO3_C7

SDMMC2_D1_M0

I2S1_SCLK_TX_M1

 

1.8V level

5

 

 

 

GND

 

6

 

 

 

GND

 

7

GPIO3_D0

SDMMC2_D2_M0

I2S1_LRCK_TX_M1

 

1.8V level

8

GPIO3_D3

SDMMC2_CLK_M0

I2S1_SDI1_M1

 

1.8V level

9

 

 

 

GND

 

10

 

 

 

GND

 

11

GPIO3_D1

SDMMC2_D3_M0

I2S1_SDO0_M1

 

1.8V level

12

GPIO3_D2

SDMMC2_CMD_M0

I2S1_SDI0_M1

 

1.8V level

13

 

 

 

GND

 

14

 

 

 

GND

 

15

GPIO3_D5

SDMMC2_PWREN_M0

I2S1_SDI3_M1

 

1.8V level

16

GPIO3_D4

SDMMC2_DET_M0

I2S1_SDI2_M1

 

1.8V level

  • Debug UART Pin Spec

    Pin#

    Assignment

    Description

    1

    GND

    0V

    2

    UART2DBG_TX

    output

    3

    UART2DBG_RX

    intput

  • USB Port

Each USB 3.0 port has 1.4A overcurrent protection.

  • RTC

RTC backup current is 0.25μA TYP (VDD =3.0V, TA =25℃).Connector P/N: Molex 53398-0271





[Tech-support]

Wiki: https://youyeetoo.com/blog/

Forum: bbs.youyeetoo.com

ExpertSupport: support@smartfire.cn

 

Payment

1. If the payment is not available, your order will be closed automatically. ​2. Seller are responsible for any insurance, problems and damage which caused by shipping service such accidents, delays or other issues.Besides the buyer should to be responsible for any tax and/or dutycharged by their country.

Shipping Choice


 

Self-Help Shipping Guide

Shipment

1. All item will be shippedwithin 48 hours on receipt of cleared payment.(The earlier you pay, the earlier we ship your order.) ​2. If you need faster shipment, please choose DHL or EMS or FedEx IP(Shipping fare paid by yourself). Or we will deliver via the default method. ​3. Please make sure that your shipping address is 100% correct ​4. We ship items to worldwide with delivery time guarantee

Contact us

1.If you have any requestplease don't hesitate to contact us at first time we will help you and solve your issue within 24 hours. ​2. All emails will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your email and we will reply you as soonas possible. ​3. Warranty services are for replacements only, any problem please kindly email us frist, we will accept your advise & request.

Return&Refund

1.Refund or resendnew for any orders due to the product quality problem. ​2.We accept any unused itemin its original package as return within 7 days of delivery. Buyers must provide the tracking number, specific reason forthe return. ​3. if it's buyer' s reason lead to the return package, buyers need to pay for round shipping fare. ​4. We will refund to buyer after we receive the returns in its original condition package. Or buyers could choose to have a replacement.

FeedBack

1.As your feedback is really important to us, please take a few minute to leave the positive feedback if you are satisfied with our products and service .Also we will do the same for you ASAP. Thanks! ​2. Please don't hesitate to contact usbefore you leaving negative or neutralfeedback. We will try our best to resolve your problem and meet your need.

 

Please be aware that due to your computer monitor display the color may have some difference between the picture and the physical item

Please according to you to buy the dress fabric, select the corresponding fabric color chart

Average rating:
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login
Links:Wig
Message Us