Object recognition using Artificial Intelligence has never been this convenient ever before.
Sipeed MaixCube is an all-in-one development platform based on the M1n module which is powered by the Kendryte K210 core. It is equipped with a camera, TF card slot, user buttons, TFT display, lithium battery, speaker, microphone and an expansion interface. This provides a great platform for everyone to start learning about AI development.
The KendryteK210 which acts as the main control chip for the MaixCube, is very powerful. The module has a built-in 64-bit dual-core processor chip and 8M of on-chip SRAM. It has outstanding performance in AI machine vision and Auditory applications. It has a variety of hardware acceleration units such as KPU, FPU, FFT, etc. and the total computing power can be up to 1TOPS, which can conveniently realize machine vision/hearing algorithms of various application scenarios, and can also perform pre-processing work of voice scanning and voice data output.
Users can use MaixCube to easily build a face recognition access control system.
Through the SP-MOD interface on the MaixCube which is a standard 2.54mm 2x4 Pin female header, with Vcc, GND, and 6 signals, you can connect to various SP-MOD modules and extend your AI projects further.
1 | Handle Module | 8 | SP-MOD One-to-Multi-Adapter Board |
---|---|---|---|
2 | USB In-line Module | 9 | 1.14 inch LCD module |
3 | Microphone Array Adapter Board | 10 | Single point ToFu Module |
4 | Weather Station Module | 11 | FPC Extension Module |
5 | PSRAM Module | 12 | Bluetooth Module |
6 | Credit Card Module | 13 | Ink Screen Module |
7 | Grove Adapter Board | 14 | LoRa Module |
Before getting to know about the MAIX product series, it is very necessary to understand the MaixPy project. It can help you quickly use the Al module.
MaixPy is a project of porting Micropython to K210 chip (running Micropython parser on K210), that is, users can finally control the function of K210 chip through Micropython programming. For example, you can directly call the facial recognition algorithm built into the firmware through Micropython programming, and finally generate a Micropython file, which can be downloaded to the Flash chip, and run on it. In addition, MaixPy supports the normal operation of MCU and integrates machine vision and microphone arrays to rapidly develop intelligent applications in the field of AIoT with extremely low cost and practicality.
By default, the development board has burned MaixPy firmware (the firmware source code is open source and can be downloaded from Github). MaixPy has developed a variety of functional libraries that developers can call directly. Maix series products use Maix IDE developed by the Sipeed team. The software is free of installation. After downloading, you can directly use MaixPy to use Micropython script syntax. Developers can edit the script on the computer and upload it to the development board to execute the script directly on the development board. The IDE can view camera images in real-time and save files to the development board, which is very convenient for development.
In addition to MaixPyIDE, developers can also use ArduinoIDE, PIatformIO IDE and other environments for development, please refer to our technical information for details.
Kendryte K210 | |
---|---|
Core | RISC-V Dual-Core 64-bit, with FPU |
Frequency | 400MHz (overclockable to 600MHz) |
SRAM | Built-in 8M Byte |
Image recognition | QVGA @ 60fps / VGA @ 30fps |
Voice recognition | Microphone array (8mics) |
Network Model | supports YOLOv3/TinyYOLOv2/face recognition, etc. |
Deep learning framework | Support frameworks such as TensorFlow / Keras / Darknet / Caffe |
Peripherals | FPIOA, UART, GPIO, SPI, PC, PS, TIMER |
Hardware acceleration unit | KPU convolution operation accelerator |
FPU floating point accelerator | |
APU Audio processor | |
FFT Fourier transform accelerator | |
MaixCube Module | |
Onboard Peripherals | Button x 3 |
Camera x 1 | |
RGB LED x 2 | |
1.3 inch TFT screen | |
Electret Microphone x 1 | |
128Mbit Flash x 1 | |
Accelerometer x 1 | |
Onboard Interfaces | USB Type-C Interface |
Audio interface (supports external speakers) | |
TF card slot | |
Grove standard interface | |
SP-MOD interface (supports SP-MOD interface module) | |
Power supply | USB-Type-C / Internal lithium battery (200mAh) |
Software Development | |
Operating system | FreeRTOS, Linux |
Face recognition | Recognition accuracy up to 98% |
Development environment | MaixPy IDE, PlatformlIO IDE, Arduino IDE, etc. |
Programming languages | C, C ++, MicroPython |
1.3 inch TFT screen 2. Reset button 3. Power button
4.Grove interface 5.SP-MOD interface 6.TF card slot
7.camera8.Type-C interface9. Three-way button
Maix Cube is very powerful. The module has a built-in 64-bit dual-core processor chip with 8M
The on-chip SRAM has outstanding performance in Al machine vision and hearing performance, and has built-in multiple hardware acceleration
Unit (KPU, FPU, FFT, etc.), the total computing power can reach up to 1TOPS, which can easily realize each
Machine vision/hearing algorithms for similar application scenarios can also perform voice scanning and voice data output.
Set processing work.
Payment
1. If the payment is not available, your order will be closed automatically. 2. Seller are responsible for any insurance, problems and damage which caused by shipping service such accidents, delays or other issues.Besides the buyer should to be responsible for any tax and/or dutycharged by their country.
Shipping Choice
Self-Help Shipping Guide
Shipment
1. All item will be shippedwithin 48 hours on receipt of cleared payment.(The earlier you pay, the earlier we ship your order.) 2. If you need faster shipment, please choose DHL or EMS or FedEx IP(Shipping fare paid by yourself). Or we will deliver via the default method. 3. Please make sure that your shipping address is 100% correct 4. We ship items to worldwide with delivery time guarantee
Contact us
1.If you have any requestplease don't hesitate to contact us at first time we will help you and solve your issue within 24 hours. 2. All emails will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your email and we will reply you as soonas possible. 3. Warranty services are for replacements only, any problem please kindly email us frist, we will accept your advise & request.
Return&Refund
1.Refund or resendnew for any orders due to the product quality problem. 2.We accept any unused itemin its original package as return within 7 days of delivery. Buyers must provide the tracking number, specific reason forthe return. 3. if it's buyer' s reason lead to the return package, buyers need to pay for round shipping fare. 4. We will refund to buyer after we receive the returns in its original condition package. Or buyers could choose to have a replacement.
FeedBack
1.As your feedback is really important to us, please take a few minute to leave the positive feedback if you are satisfied with our products and service .Also we will do the same for you ASAP. Thanks! 2. Please don't hesitate to contact usbefore you leaving negative or neutralfeedback. We will try our best to resolve your problem and meet your need.
Technical Support
Expert Support:jinxia@smartfire.cn Skype: smartfire_cn
Product Customization:jinxia@smartfire.cn