The NanoPi NEO3 is another fun board developed by FriendlyELEC for makers, hobbyists and fans.
Software Features |
|
Hardware Spec |
|
OS Support |
FriendlyWrt 19.07-snapshot Ubuntu Core 18.04 (64-bit)(Linux-5.4 + U-boot-2017.11) |
CPU: |
RockChip RK3328, Quad-core 64-bit high-performance Cortex A53 |
DDR4 RAM: |
1GB/2GB 32-bit DDR4 |
USB Host: |
1x USB3.0 Type A and 2x USB2.0 on 2.54mm pin header |
Keys |
User Key x 1 |
microSD Slot: |
MicroSD x 1 for system boot and storage |
GPIO: |
2.54mm pitch 26 pin-header, include I2C, UART, SPI, I2S, GPIO |
Serial Debug Port: |
2.54mm pitch 3 pin-header, 115200bps |
LED: |
Power LED x 1, System LED x 1 |
PCB Dimension: |
48 x 48mm |
Power: |
5V/1A, via Type-C or GPIO |
Working temperature: |
-20℃ to 70℃ |
Before starting to use your NanoPi NEO3 get the following items ready
NanoPi NEO3
MicroSD Card/TF Card: Class 10 or Above, minimum 8GB SDHC
TYPC-C 5V/2A power adapter
A host computer running Ubuntu 16.04 64-bit system
To make your NanoPi NEO3 boot and run fast we highly recommend you use a Class10 8GB SDHC TF card or a better one. The following cards are what we used in all our test cases presented here:
SanDisk TF 8G Class10 Micro/SD High Speed TF card:
SanDisk TF128G MicroSDXC TF 128G Class10 48MB/S:
川宇 8G C10 High Speed class10 micro SD card:
[Tech-support]
Expert Support:vip@youyeetoo.com
Skype: meiqiao_1
Wiki: https://youyeetoo.com/blog/
Forum: youyeetoo.net